The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They stop the car from being started without a key fob and are effective in stopping hotwiring and other traditional methods of vehicle theft. Innovative methods like key cloning and relay theft are becoming increasingly common.
Designed to combat these recent trends The ghost immobiliser is designed to make your vehicle inaccessible. It doesn't make use of LED indicators, radio signals or key fobs and is quiet and stealthy.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to stop key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It operates quietly and is almost undetectable to thieves. It uses buttons on your steering wheel as well as the centre console to create an individual pin-code sequence you must enter before you can start the car. You can create as many as 20 different sequences in order to increase security. It's easy to install and doesn't require any additional hardware.
To ensure the highest quality results It is recommended that you choose a reputable CAN-immobiliser installer who is skilled in your particular vehicle. Ideally, they will have a workshop in your area where you can go to get your installation done. They'll also have a variety tools and materials to assist you with the installation process. These include hand tools, a multimeter and insulation tape and heat shrink tubing to secure the connections. A user's manual will give specific instructions for the wiring of your vehicle.
Disconnect the battery before beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is essential, as incorrect identification can result in a faulty integration of the system. This Internet site is also a good idea to mark the wires using tiny pieces of tape or mark them with labels. Additionally, you can make use of a multimeter to confirm that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves may employ various methods to evade Ghost Immobilisers, such as jamming or spoofing. These techniques work by amplifying the signal that is sent from your key fob to the electronic control unit in your vehicle. With the help of advanced anti-jamming technologies and a constant monitoring, you can protect your vehicle from these sophisticated attacks.
Increased security
Ghost immobilisers are an extra layer to protect your vehicle from theft. It uses a PIN security system that is entered via buttons on your steering wheel or dashboard making it difficult for thieves to steal your car. The device is designed to be hidden inside your vehicle. It doesn't have any lights, or other signals to alert a potential burglar to its presence. ghost immobiliser for sale with your car's ECU via the data bus, meaning it isn't susceptible to the same hacking and relay attacks that could disable conventional security systems.
It's a great option for those who own prestige vehicles which are at greater risk of theft due to their value and the popularity of their vehicles. visit this page enhanced security features guard against key duplicates, ECU swapping, and other threats to your car's security. Ghost immobilisers can be connected to an app, so that you can easily arm and dearm them. They also come with a service/valet mode that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Another great feature of a ghost immobiliser is that it does not require cutting of wire. This is a nice option, particularly if you own a brand newer vehicle that does not have any immobiliser built-in technology. Certain systems can also be integrated with GPS tracking devices, which can provide additional security to your vehicle. A GPS tracker may also help to reduce your insurance premiums. If you opt to buy ghost immobilisers be sure it is TASSA verified and that a professional installer installs it for you.
Compatibility with all major brands and models
The Ghost Immobiliser has been designed to work with all major models and makes, securing your precious possessions from theft. It generates a unique pin code using buttons on your steering wheel, console, or door panels. You must enter this code before you are able to drive. The system is tamper-proof unbreakable and comes with a three-year warranty. It is also fully endorsed by insurance companies. This means you can lower your insurance cost of insurance.
In contrast to standard immobilisers that utilize the key fob of your car to control the car's ignition and ignition, the Ghost system works by connecting directly with the engine controller unit using the CAN data bus. This means it is secure from tampering, is nearly impossible to remove or disable and is not hacked by organised car thief criminal gangs. Additionally to this, the Ghost system can be linked with an encrypted iPhone app that allows for remote monitoring and management.
You can create an PIN code that is easy for you to remember but mathematically, it is impossible for thieves to determine. The PIN can be personalized and changed at any time so that you can keep your vehicle secure even if it's parked on the streets or in a public parking lot. You can also choose the valet or service mode if someone else needs to drive your vehicle for a short period or when it is in the garage. This feature is also an excellent way to stop your vehicle from being stolen by a scammer mechanic. You can choose an Ghost Call alert to give you more peace of mind. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key relay or cloning. It connects to the car's CAN network and blocking communication with the engine ECU. This makes it difficult for thieves to clone or hack your vehicle, which makes the installation of this system a good idea for any driver.
After installation, you'll need to enter a PIN up to 20 digits long using the buttons on the dashboard and the steering wheel to start the car. The system is completely hidden and undetectable to thieves, since it doesn't emit any radio frequency signals. It is also able to be configured to allow a user-changeable PIN code, which further enhances its security. The system is also designed to stop circuit cutting, making it virtually impossible to hack into.
Certain systems let you connect directly to the immobiliser using an app on your phone to disarm it immediately in the event that you forget your PIN. Some systems also have a service/valet setting that allows you to start your car for instance, if you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also indetectable to thieves because it doesn't transmit radio signals, a major benefit over other aftermarket car security systems. Additionally, it is easy to use and doesn't require any complicated wiring. You can also use it together with a dash camera for additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system is able to be hardwired to ensure the highest performance and durability.
Installation
It is crucial to select the most reliable immobiliser ghost in order to protect your car from thieves. This device can stop car thefts by blocking communication between key fobs and the engine controller unit. This stops thieves from stealing the signal and then cloning your key fob to start your vehicle. It can also detect any time it has been tampered with and notify the owner of the vehicle.
The device is easy to install and connects to your vehicle's existing systems. It does not require any modification to the wiring of your vehicle and can be hidden in a hidden location, such as under the dashboard. To make sure that the device is properly installed, follow instructions in the user manual. It is also essential to test the system after installing it. This will ensure that the immobiliser ghost is functioning in the way it is intended.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or bypass the system. The installation process generally takes 2-3 hours.
It is recommended to review the wiring diagram for your vehicle prior to the installation process. This will help you locate the CAN High and CAN Low wires needed to connect the Ghost to the engine of your vehicle. Check all connections to make sure they are safe and well-insulated.
Once the installation is complete after which you can use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if it isn't started with the correct PIN, which you can create yourself. The ghost of the immobiliser can be changed to Service/Valet Mode in case you need your vehicle to be serviced or valet-parked.